TEL: 415-242-1551
 


Cords

 

D3/D4 Channel Connectors

Product Information

 

Description

  D3/D4 channel connector (6 plug
card) to dual 310. Coil cord with a
480B CAU plug on one end and a
425A dual 310 plug on the other
end. Extends from 3' to 16'. This
cord is designed as a patch cord
between D4 channel banks and
Channel access testing units.
 
  D3/D4 channel connector (6 plug card)
"monitor" to alligator clips. Connects a
transmission measuring set directly to
D3/D4 channel units. Works on 2 and
4 wire circuits. Equipped with a 3' to
16' coil cord, two alligator clip sets and
a CAU test plug. Also available with 2
Alligator clips TX-P6AG.
  D3/D4 channel connector (6 plug) Both
ends. "Frogging" test cord. Isolates
trouble in D4 & SLC-96 channel banks. "T" carrier test cord to patch to spare
channel. Works 2/4 wire channel units
in the D4 channel banks and special
services channel in SLC-96 Coil cord
that extends 16'.
 
  D3/D4 channel connector (line/drop)
button to 310 "Y" (Tx&Rx). Connects
transmission measuring set directly to
D3/D4 channel units. Works on 2/4
wire circuits. Equipped with a 3' to 16'
coil cord, two 310 plugs (R&B) and a
CAU test plug. Also available with
(R/B) Bantam plugs.
 
  Enables a technician to monitor the
test jack on the D4 channel using a
butt-in set (dial test set). Equipped
with 471A WECO type QD. 4'6"
braided cord and D4 test plug that
monitors 2/4 wire circuit packs and is
switchable to draw on a 2 wire circuit.
 

 

 
  © Copyright 2004-2005 T&S Trading Co. All Rights Reserved.