TEL: 415-242-1551
 


Cords

 

Single 310 Cords

 

Product Information

 

Description

  3 conductor single 310 plugs on
both ends.
 
  3 conductor single 310 plug to
single bantam plug.
 
  3 conductor male 310 plug to 3
conductor female bantam receptacle.
Extension cord, test
equipment patch cord.
 
  3 conductor male 310 plug to
3 conductor female 310 receptacle.
Extension cord, test equipment
patch cord.
 
  3 conductor single 310 plug to
dual bantam plug.
 
  3 conductor single 310 plug to
(463A) 4B type protector
Please specify wiring.
 
  3 conductor single 310 plug to
526A plug. Plugs into 4C type
protector
 
  3 conductor single 310 plug to
Porta plug. Test equipment
(bantam) to Porta access.
 
  3 conductor single 310 plug to
453A or P2EF. Test equipment
(bantam) to P2EF connector
access.
 
 
  3 conductor single 310 plug to 66
block connector. Conversion, test
and patch cord.
 
  3 conductor single 310 plug to
SLC-96 connector. Provides hollow post access to odd or even channels at faceplate of
SLC-96 channel units.
 
  3 conductor single 310 plug to 3
conductor 800 DSX plug. Test
equipment (bantam) to 800 DSX
access.
 
  3 conductor single 310 plug to 3
conductor 110 plug. Test
equipment (bantam) to 110 access.

 
  3 conductor single 310 plug to 2
solder llugs. Test equipment
outside plant access.
 
  3 conductor single 310 plug to 3
solder lugs. Test equipment
outside plant access.
 
  3 conductor single 310 plug to
dual banana plug. Test equipment
(dual banana) to access 310 jacks.
 
  3 conductor single 310 plug to wire
wrap terminals (female). Test
equipment to access terminal
block pins.
 
  3 conductor single 310 plug
to pin plugs (2). Conversion
test cord
 
  3 conductor single 310 to
mini-grabber clips (2). Test
equipment to various
access points, bare cable.
 
  3 conductor single 310 to R/B
alligator clips (2). Test equipment
to various access points,
bare cable.
 
  3 conductor single 310 to R/B/G
alligator clips (3). Test equipment
to various access points,
bare cable.
 
  3 conductor single 310 plug to
heavy test clips. Test equipment
access on 66 block. Availablein :
Single Pin, Bed of Nails, or Single
Pin & Bed of Nails.
 
  3 conductor single 310 plug to
RJ22 modular 4 position, 4 wire
connector. Please specify wiring.
 
  3 conductor single 310 plug to
RJ11 modular 6 position, 2 wire
conductor. Please specify wiring.
 
  3 conductor single 310 plug to
RJ11 modular 6 position, 4 wire
conductor. Please specify wiring.
 
  3 conductor single 310 plug to
RJ11 modular 6 position, 6 wire
conductor. Please specify wiring.
 
  3 conductor single 310 plug to
RJ48 modular 8 position, 6 or 8
wire conductor.
Please specify wiring.
 
  3 conductor 310 terminating plug.
100 ohm resistance.
 
  3 conductor 310 terminating plug.
135 ohm resistance.
 
  3 conductor 310 terminating plug.
600 ohm resistance.
 
  3 conductor 310 terminating plug.
900 ohm resistance.
 
  3 conductor adapter.
Converts bantam plug to 310.
Nickel plated.
 
  310 "Y" (Tx and Rx) to RJ48
modular plug. (Tx and Rx) from
network interface unit. Please
specify wiring. C=T1/DS1wired 1245
 
  310 "Y" (Tx and Rx) to RJ48
modular plug. (Tx and Rx) from
network interface unit. Please
specify wiring. S=DS0 Wired 1278
 
  310 "Y" (Tx and Rx) to 9 pin (male)
connector. Please specify wiring
 
  310 "Y" (Tx and Rx) to 9 pin (female) connector.
Please specify wiring
 
  310 "Y" (Tx and Rx) to
15 pin (male) connector.
Please specify wiring
 
  310 "Y" (Tx and Rx) to 15 pin
(female) connector.
Please specify wiring
 

 

 
  © Copyright 2004-2005 T&S Trading Co. All Rights Reserved.