TEL: 415-242-1551
 


Cords

 

Weco 463A 5 Pin Protector Patch and Test Cords

Product Information

 

Description

  4B type protector to 4B protector.
"Frogging" test cord.
Wiring Diagram
 
  4B type protector to 4B protector.
"Looping" test cord.
Wiring Diagram
 
  4B type protector to 4B protector.
"Loop Back" test cord.
Wiring Diagram
 
  4B type protector to Bantam
8' cord used to test at MDF or
RT (5 pin coils).
Please specify wiring.
 
  4B type protector to 310 plug 8'
cord used to test at MDF or
RT (5 pin coils).
Please specify wiring.
 
  4B type protector to 3 conductor
dual bantam plug. T1 repeater
powering unit test equipment
access at coil. Specify wiring.
 
  4B type protector to 3 conductor
dual 310 plug. T1 repeater powering
unit test equipment access at coil. Replaces w4. Please specify wiring.
 
  463A to 526 plug 16' cord mounted
at cabinet, used to test in or out
from protectors (5 pin coils).
Equivalent to W4DG
Please specify wiring.
 
  4B type protector to 453A or P2EF
plug. Test equipment P2EF
connector access.
Please specify wiring.
 
  Bantam "Y" Cable and equipment to 4B type protector. (Tx and Rx) access at coil. Please specify wiring.
  310 "Y" cable and equipment to 4B
type protector (Tx and Rx) access
at coil. Please specify wiring.
 
  Protector to modular RJ11 6
position 5 wires (4 conductors plus
ground post). 2,4,or 6 pin RJ11 plug.
Also available in 8 pin RJ45 Please
specify cord wiring, look in/out.
 
  4B type protector to round lugs (4).
Permanent cabinet mounting for
easy access in cabinet for testing.
Please specify wiring.
 
  3 conductor single 310 plug to wire
wrap terminals (female). Test
equipment to access terminal block
pins. Please specify wiring.
 
  4B type protector to alligator clips. Access at coils. Standard length
16". Please specify wiring.
 
  4B type protector to alligator clips.
Access at coils. Standard length
16". Please specify wiring.
 
  4B type protector to alligator clips.
Access at coils. Standard length
16". Please specify wiring.
 
  3' cord access at MDF (frame).
Available in: Single Pin, Bed of
Nails or Bed of Nails and Single Pin.
Please specify wiring.
 
 
Westek's W111-P Good Shoe/Bad Shoe Test Cord provides temporary emergency restoration to a bad cable pair in a matter of seconds, while still providing protection to the line. Westek's W111-P is compatible with AT&T, Reliable and Cook main frame blocks. This 8ft. cord features a built-in protector block which incorporates any standard AT&T, Reliable, or Cook-type five-pin protection module. When a protector module is inserted into the W111-P protector block, standard protection is restored to the pair. Without protection, a power surge or lightning strike could damage expensive Central Office equipment in a matter of seconds. The W111-P cord comes in lengths of 8', 10', 16' & 25' with a 463A plug-in connector on each end. The word "GOOD" is marked on one plug-in and the word "BAD" is marked on the opposite plug-in. The outside craftsperson making the temporary repair leaves the area marked, identifying which pair is good and which pair is bad.

Westek's W111-P-L8 Good Shoe/Bad Shoe Test Cord provides temporary emergency restoration to a bad cable pair in a matter of seconds, while still providing protection to the line. Westek's W111-P-L8 is compatible with Porta Systems connector blocks. The W111-P-L8 features a built-in protector block which incorporates any standard AT&T, Reliable, or Cook-type five-pin protection module. When a protector module is inserted into the W111-P-L8 protector block, standard protection is restored to the pair. Without protection, a power surge or lightning strike could damage expensive Central Office equipment in a matter of seconds. The W111-P-L8 cord comes in lengths of 8', 10', 16' & 25' with a Porta plug-in connector on each end. The word "GOOD" is marked on one plug-in and the word "BAD" is marked on the opposite plug-in. The outside craftsperson making the temporary repair leaves the area marked, identifying which pair is good and which pair is bad.

Westek's W111-2P Good Shoe/Bad Shoe Test Cord was developed to perform temporary emergency restoration of a bad cable pair. The W111-P2 is unique in that it provides the means to restore a bad cable pair in a matter of seconds, while still providing protection to the line. Another exclusive feature of the W111-2P is its compatibility with AT&T, Reliable, Cook and Porta Systems connector blocks. This cord comes in lengths of 8', 10', 16' & 25' with two individual plug-ins on each end, one designed to fit AT&T, Reliable, and Cook blocks, the other to fit Porta Systems blocks. Only one plug-in on each end is used at a time; the loose plug-in can then be clipped up and out of the way. The word "GOOD" is marked on one plug-in and the word "BAD" is marked on the opposite plug-in. The outside craftsperson making the temporary repair leaves the area marked, identifying which pair is good and which pair is bad. The fram technician will then know how to make the permanent repair.

 

 
  © Copyright 2004-2005 T&S Trading Co. All Rights Reserved.