TEL: 415-242-1551
 


Masks and Hoods

   
   
 
FULLY DISPOSABLE TYVEK® HOOD      
• Designed with one piece construction
• Breathing tube and head suspension integrated
with hood assembly
• Fully disposable, eliminating need for decontamination
• Flexible and splash resistant
• Multi-layer sound dampening breathing tube
• Ideal for workers with beards or goggles
• Designed to connect to LP Flow Adapter, Adjustable
Flow Control Valve, Personal Air Cooler or Air
Temperature Controller
 
 
Part No. 9910-D Fully Disposable Tyvek Hood w/Low
Pressure Flow Adaptation
Part No. 9911-20 Replacement Fully Disposable Tyvek Hood
Assembly w/Suspension
 

FULLY DISPOSABLE SARAN HOOD      
• Same unique features as the fully disposable Tyvek Hood
• Laminated with Saran
• Offers non permeability to air and moisture
• Increased protection against hazardous materials.
• Heat tape seams to enhance the seal against liquids and gas
• Designed to connect to LP Flow Adapter, Adjustable Flow
Control Valve, Personal Air Cooler or Air Temperature Controller
 
 
Part No. 9910-DS Fully Disposable Saran Hood w/Low Pressure
Flow Adaptation
Part No. 9911-20S Replacement Fully Disposable Saran Hood
Assembly w/Suspension
 

DOUBLE BIB FULLY DISPOSABLE TYVEK HOOD      
• Increased protection of two bibs
• Inner bib directs air flow down cooling the body
• Outer bib secures under arms preventing hood from rising
• Features extra large lens for better visibility
• Designed to connect to LP Flow Adapter, Adjustable Flow
Control Valve, Personal Air Cooler or Air Temperature Controller
 
 
Part No. 9912-D Double Bib Fully Disposable Tyvek Hood
Assembly w/Low Pressure Adaptation
Part No. 9911-10 Replacement Double Bib Fully Disposable
Tyvek Hood Assembly w/suspension
 

DISPOSABLE DOUBLE BIB HARD HAT HOOD      
• Extra space for hard hat
• Offered with either Hard Hat, Ratchet or Disposable Suspensions
• Optional Chin Strap
• Reinforced heavy duty breathing tube with swivel connection
• Split air channel delivers air inside hood around temples
• Designed to connect to LP Flow Adapter
 
 
Part No. 9909-HD w/Hard Hat
Part No. 9909-RD w/Rachet
Part No. 9909-SD w/Suspension
Part No. 9909-10 Replacement Disposable Double Bib Hard Hat
Hood Assembly w/Suspension
Part No. 9909-11 Replacement Hood w/Suspension only
 

TYVEK SUPPLIED AIR RESPIRATOR      
• For bearded workers
• A large clear window offers a wide view
• Disposable design
• Just remove the down tube and clamp before disposal
• Replacement hood comes complete with a hood harness
 
 
Part No. 9910 Complete Tyvek Respirator Hood Assembly
Part No. 9910-10 Replacement Hood w/Suspension
 

FULL MASK SUPPLIED AIR RESPIRATOR      
• Made from silicone for durability
• Double sealing flange for improved face to mask seal
• Deep chin pocket for more comfortable fit
• Replaceable Lens with anti-fog, anti-scratch coating
• Removable hairnet
• Fits under hard hat
• Unique "over the shoulder" design holds air hose out of
the way of work
 
 
Part No. 9901 Full Mask Assembly
Part No. 9901-25 Lens Covers 25/pkg
 

HALF MASK SUPPLIED AIR RESPIRATOR      
• Made from silicone for easy cleaning
• Will not lose shape in storage
• Low profile to fit under welding shields
• Same "over the shoulder" hose as Full Mask
• Comes with OBAC quick connect fitting
 
 
Part No. 9920 Half Mask Assembly
 

LOW PRESSURE FLOW ADAPTER
For use with a low pressure supplied air respirator, the
Low Pressure Flow Adapter allows the hood to connect
to an ambient air pump, or any low pressure air source.
It is a low profile, lightweight, plastic threaded fitting
that offers the convenience of OBAC quick connect design
with a belt and clip assembly. The controller is economical
enough to dispose of with the hood assembly or save for
use with a replacement hood. It requires an air supply
pressure range of 2 to 40 psi.
Part No. 9910-11 Low Pressure Flow Adapter w/ belt
 

 

   

 

 
 
  © Copyright 2004-2005 T&S Trading Co. All Rights Reserved.