TEL: 415-242-1551
 


Pumps & Accessories

   
T100 ROTARY VANE      
This lightweight, low maintenance, rotary vane sampler,
manufactured by Allegro Industries, has a sampling range
of 3-20 LPM, and is excellent for use for sampling asbestos
(25mm cassettes), lead (37mm cassettes) and mold
(Air-O-Cell cassettes). This sampler is the best value in
the market today, meets OSHA and AHERA standards and
comes complete with adjustable aluminum tripod, six feet
of vinyl tubing, inline filters, muffler jars, feet, handle and
built-in switch. Weight: 9.7 lbs.
   
 
 
Part No. 9803 T100 Sampling Pump with Stand
Part No. 9803-88 T100 Sampling Pump without Stand
 

T100M ROTARY VANE      
This upgraded version of the T100 Sampling Pump
(rotary vane) is manufactured by Allegro Industries,
and incorporates all the features of the T100 with
the addition of a built-in adjustable 5-50 LPM flow
meter. The sampler is specifically designed to be
used for not only asbestos, lead and Air-O-Cell
cassettes, but will work with Impactors (adjustable
flow range 3-30 LPM). It comes complete with
adjustable aluminum tripod, six feet of vinyl tubing,
inline filters, muffler jar, feet, handle and built-in switch.
Weight: 9.9 lbs.
   
 
 
Part No. 9803M T100M Sampling Pump with Stand
Part No. 9803-88M T100M Sampling Pump without Stand
 

 
DUAL SAMPLER      
This powerful, low-maintenance rotary vane sampler
has an extensive sampling range which is excellent
for use in sampling asbestos (25mm cassettes), lead
(37mm cassettes), mold (Air-O-Cell cassettes), as
well as for use with Impactors. This sampler is the
most powerful on the market today and is specifically
designed for drawing dual samples in a mold environment.
It comes with a stand, and two special adapters: one
to hold an Air-O-Cell cassette, and one to mount an
Impactor. The pump includes two adjustable flow
meters, built-in switch cord, handle, feet and exhaust
muffler. Weight: 30 lbs.
   
 
 
Part No. 9801 Dual Sampling Pump with Stand
 

VENTURI SAMPLING PUMP      
This unique sampling pump is air powered and requires
only 40 PSI to draw samples. It is versatile and virtually
maintenance free. There are no moving parts, as it is air
operated. Specifically designed for those environments
where there is no electrical power within the containment
area, or quiet sampling is needed, this sampler is equipped
with 25 feet of tubing to run outside the containment area
and hook up to a compressor. The Venturi sampler comes
complete with a built-in stand and vinyl tubing. This
one-of-a-kind low cost alternative is excellent for all
types of sampling, including asbestos (25mm cassettes),
lead (37mm cassettes), mold (Air-O-Cell cassettes), as
well as for use with Impactors. Weight: 2 lbs.
   
 
 
Part No. 9802 Venturi Sampler
 

DIAPHRAGM SAMPLING PUMP      
Using a pulsating diaphragm to sample air quality, this
low maintenance pump is well suited for use in sampling
asbestos (25mm cassettes PCM asbestos cassettes only),
lead (37mm cassettes), and mold (Air-O-Cell cassettes).
The quiet operating pump is excellent for indoor testing.
The adjustable regulator provides a locked-in operating
range of 3-15 LPM. It meets OSHA and AHERA standards
and comes complete with adjustable aluminum tripod,
five feet of vinyl tubing, inline filters, muffler jars, feet,
handle, and switch cord. Weight: 6.2 lbs
   
 
 
Part No. 9804-51 Diaphragm Pump with Stand
Part No. 9804-50 Diaphragm Pump without Stand
 

A100 ROTARY VANE      
This low maintenance rotary vane pump by Gast
Manufacturing meets OSHA and AHERA standards
for air sampling. With a sampling range of 3-20 LPM,
the A100 is excellent for use for sampling asbestos
(25mm cassettes), lead (37mm cassettes) and mold
(Air-O-Cell cassettes). The pump is complete with
an aluminum tripod, five feet of vinyl tubing, inline
filters, muffler jars, feet, handle and a power cord
with switch. Weight: 11 lbs.
   
 
 
Part No. 9804 A100 Sampling Pump with Stand
Part No. 9804-88 A100 Sampling Pump without Stand
   
 

WALL SAMPLING ADAPTER      
Requiring only a small 3/8" hole in the wall to sample,
place the tubing attachment into the wall and the
connection is made directly to Air-O-Cell cassette.
Completely disposable, there is no need to clean or
worry about cross contamination.
   
 
 
Part No. 9803-01  
 

DC SAMPLING PUMP      
This unique DC powered, totally self-contained
programmable unit is designed specifically to run
Air-O-Cell (mold) cassettes. Flow range is 5-20
liters, but it is programmed for 15-LPM operation
for use with Air-O-Cell cassettes. Preprogrammed
buttons offer convenient sampling times of 1, 2, 5
or 10 minutes. An end-of-sample audio/visual
alarm indicates completion of the sample. There
is easy keypad calibration with the supplied
calibration flow meter, as well as a charger
included in the kit. The DC powered pump allows
for 5 hours of continuous operation. It is small,
lightweight, compact and includes an adjustable
tripod, with a special adapter to hold the DC pump
at the breathing air zone. Weight: 1.2 lbs.
   
 
 
Part No. 9801-51 DC Sampler Kit with Stand (Battery operated)
Part No. 9801-50 DC Sampler Kit without Stand (Battery operated)
 

ALLEGRO IMPACTOR      
A single stage bioaerosol impaction sampler to sample
mold and fungi with 400 precision drilled holes and a
base section which holds a standard dish for agar
media. The Allegro Impactor is a proven performer
for collecting viable mold samples.
   
 
 
Part No. 9804-15  
 

FLOW METER      
Allegro's flow meters are separate from the pump to
allow the user to set the flow for more than one pump
with the same meter. Features an expanded scale and
includes necessary adapters for use with particulate
cassettes.
   
 
 
Part No. 9804-03 Flow Meter, 0-20 LPM
Part No. 9804-03I Flow Meter, 3-30 LPM
Part No. 9801-03 DC Sampler Flow Meter
 

PRIMARY CALIBRATOR      
Using bubble flow for high volume samples.
   
 
 
Part No. 9803-50  
 

TAPE SAMPLER      
Sampling of possible microbial, bioaerosol and
inorganic dust contamination is made easy and
effective with Tape Sampler. A flexible plastic
microscope slide with a pre-defined 1" x 1"
adhesive area allows you the ability to quickly
take a sample and measure the degree of
contamination. Perfect for non-transportable
materials. Each slide has a unique serial number
for traceability and packed in a slide mailer to
prevent cross contamination. 10/pkg.

 

   
 
 
Part No. 9803-14  
 

SAMPLING PUMP CARRY BAG      
High quality nylon bag is padded to protect
your sampling products. The large bag is designed
to contain up to two sampling pumps with stands,
cassettes, impactors, and all of your on-the-job sampling needs.
   
 
 
Part No. 9801-B  

 

NEXT  >>

 
 
  © Copyright 2004-2005 T&S Trading Co. All Rights Reserved.